Degreasers

Degreasers
Set Descending Direction
View as List Grid

16 items

Page
per page
  1. CCI MULTI-WASH
    MULTI-WASH is a water soluble screen wash designed for the removal of all inks, including plastisol and UV inks. This product works especially well on tough inks such as: water base, vinyl, epoxy and enamels. This Product can also be used for the removal of stubborn cured ink stains (ghost / image). Learn More
    Add to Compare
  2. CCI Nutralyze

    This is a super concentrated formula for degreasing and wetting all types of screen fabrics, including polyester, nylon and stainless steel. When completely water rinsed, NUTRALYZE® leaves your fabric free of silicones or other types of oils and contaminants that tend to leave a film or slippery active surface. NUTRALYZE® will also reduce incidence of pin holes. Use this solution for degreasing new or used fabric of all types before stencil making. NUTRALYZE® can be used in concentrated form, or it can be diluted 1 to 10 with water.

    Learn More
    Add to Compare
  3. CCI Stain-X Quart

    This product is a vicious dehazer and degreaser that is designed for a variety of inks. Stain-X cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers. Stain-X leaves your fabric free of all oils and contaminants, which will reduce the incidence of pinholes.

    I Before using Stain-X, remove all ink residue and emulsion from the screen.

    II Brush product on the ink side of a WET screen. Agitate on both sides of the screen with a brush or pad and set aside for approximately 1 to 10 minutes.

    III High pressure water rinse, spraying from the bottom to top, on the print side of the screen. Reverse screen and high pressure rinse, then use low pressure water and flood rinse the complete screen. Allow screen to dry before coating.

    Learn More
    Add to Compare
  4. CCI TABS-II Gallon

    This product is a super concentrated formula for degreasing and wetting all types of screen fabrics, including polyester, nylon and stainless steel. When completely water rinsed, TABS II leaves your fabric free of silicones or other types of oils that tend to leave slippery active surface. TABS II will also reduce incidence of pin holes. Use this solution for degresing new fabric of all types before stencil making.

      Prior to using, remove any ink or stencil residue.

    II  Use concentrated or can be dilute up to 1:20 with water. Brush liquid degreaser on both sides of the screen.

    III Rinse thoroughly with hot or cold water.

    Learn More
    Add to Compare
  5. Elite Combo

    Elite Combo Dehaze & Degreaser is an enviromentally approved, 100% active, low odor extremely quick penetrating and fast acting solvent designed to dissolve and clean all types of screen printable inks, adhesives, clear coatings and stains from printing mesh. Elite Combo Dehaze & Degreaser works quickly and causes no damage to printing mesh.

    Learn More
    Add to Compare
Loading ...
Load More ...
Set Descending Direction
View as List Grid

16 items

Page
per page