Textile Inks

Textile Inks
Set Descending Direction
View as List Grid

77 items

Page
per page
  1. Aqua Flow Airbrush Ink
    Aqua Flow Airbrush Colors are vibrant colors that contain premium acrylic binders, used for illustration, T-shirt arts, murals, hobbies, and auto detailing. Learn More
    Add to Compare
  2. CCI P-Charge
    P-Charge is an ink additive that will make Plastisol inks perform like waterbased discharge inks. The results are a softer hand and the feel of a waterbased print without having to have a separate mixing system. All you need are dischargeable dyed garments and P-Charge to get a new look. Learn More
    Add to Compare
  3. Clear Gel
    Clear Gel is formulated as a plastisol for printing on 100% cotton fabrics. This product has excellent clarity and gloss when printing as a 3D type gel. It gives flowing, rounded edges with no appearance of screen marks. • Short body and very low wet tack for easy printing • Fast shearing action means higher press speeds • Can be tinted with up to 30% color boosters to make gel colors • High gloss when cured under standard conditions Learn More
    Add to Compare
  4. Curable Thinner

    Curable Thinner is used to thin plastisol inks. It can be mixed into the product at any level necessary to achieve the desired printability. Keep in mind that the more of any thinner you add to ink, you are reducing the opacity and other properties of the product such as low bleed. The mixture can print through a wide variety of mesh ranges and will cure at 320 degrees F (160 degrees C).

    Learn More
    Add to Compare
  5. EF Flash-Back
    Flash-Back ink is an easy to use, one-part, plastisol ink that contains millions of light-reflecting microspheres. In daylight the ink appears to be a normal print. In other words, gray ink appears gray, and red ink appears red. However, when a Flash-Back print is exposed to a focused beam of light such as an automobile headlight or a flashlight, it reflects a bright, glittering image back at the light source. Learn More
    Add to Compare
  6. EF Glitter
    Union Ink Glitter Plastisols are recommended when printing directly on fabrics, where they give just as brilliant results as when using the more expensive Super Glitters. They are suitable for transfer printing but yield less brilliant results than Super Glitters. Learn More
    Add to Compare
  7. EF Hi Square
    Hi-Square ink, when printed correctly, will produce a print with an extraordinarily thick ink layer that retains sharp edges and crisp, highly detailed definition even after curing.This ink must be used in combination with a correctly prepared screen and carefully adjusted printing techniques. Learn More
    Add to Compare
  8. EF Holographic
    Holographic Glitter Plastisol is a series of intense sparkling, glitter colors. Designs will have the appearance of a multi-colored glitter when direct sunlight or a point light source is reflected off the holographic particles. Learn More
    Add to Compare
  9. EF Shimmer
    Direct printing on light or dark garments. Stencils: Use any direct emulsion or capillary film. Additives: Shimmer Metallic inks are supplied readyto print Reducer/Detackifier (PLRE-9000) may be add-ed if a thinner consistency is required. Curing Instructions: These inks will cure at 300 F (149 C.). Because of the relfective nature of this ink, it requires a longer curing time under the heat to reach the required temperature than standard plastisols. PRODUCTS: Standard Colors PAGE-M128 Bright Silver / PAGE-M210 Bright Gold PAGE-M300 Brilliant Red / PAGE-M500 Metallic Blue PAGE-M600 Emerald Green / PAGE-M800 Sparkling Black Learn More
    Add to Compare
  10. EF Suede
    Suede Plastisol Ink combines an extremely matte finish with a fuzzy texture and slightly raised effect. The resulting print is almost indistinguishable from suede leather in texture and appearance. Learn More
    Add to Compare
Loading ...
Load More ...
Set Descending Direction
View as List Grid

77 items

Page
per page